WPR16LA058 · Cessna 340A
Pacific Fbo Properties Cessna 340A · Accident: landing gear collapse
From Santa Barbara Municipal Airport (SBA) to Meadows Field (BFL)
Event
- NTSB case
- WPR16LA058
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- Unknown
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Cessna 340A
- Aircraft type
- Cessna 340
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N346MC
- Operator
- Pacific Fbo Properties
- Onboard fatalities
- Unknown
- Route
- From Santa Barbara Municipal Airport (SBA), Santa Barbara, CATo Meadows Field (BFL), Bakersfield, CA
- Aircraft age
- About 38 years (built 1978)
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- Landing · landing roll
- Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Landing gear collapse
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Aircraft › Aircraft systems
- Personnel issues › Task performance
Approximate · Coordinates as recorded by the NTSB; no uncertainty radius is established.
NTSB narrative
The airline transport pilot was conducting a personal cross-country flight. The pilot reported that he configured the airplane to land at his destination airport. However, during his instrument panel scan, he observed a warning light indicating that the right main landing gear (MLG) was not locked in the extended position. He then departed the traffic pattern and attempted to troubleshoot the indication by cycling the landing gear without success. He subsequently returned to the airport and used the hand crank to manually deploy the gear but continued to receive the "gear unlocked" indication. The airplane touched down normally, but as the pilot attempted a right turn to exit the runway, the right MLG collapsed, which resulted in substantial damage to the right aileron.
Postaccident examination of the landing gear revealed that the right MLG aft drive tube, which supplies overcenter tension to the aft bellcrank and side brace lock link when the MLG is in the extended position, failed in tensile overload. According to an airplane manufacturer representative, low overcenter tension, which is typically a result of improper rigging, will cause the MLG to collapse when it is under load in the extended position. If the MLG collapses while it is in the extended positon, the aft drive tube will fracture in tensile overload.
According to the airplane service manual, the landing gear must be re-rigged following any adjustment to the gear down-lock tension; however, a representative of the pilot's maintenance provider reported that maintenance personnel had not complied with this service manual requirement after adjusting the MLG down-lock tension in 2011, 2012, and 2013. Therefore, it is likely that maintenance personnel's failure to re-rig the MLG in accordance with the manual requirements led to its being improperly rigged and to the subsequent collapse of the right MLG.
Probable cause
Maintenance personnel’s repeated failure to re-rig the main landing gear (MLG) in accordance with the airplane manufacturer's service manual requirements, which resulted in the collapse of the right MLG.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record WPR16LA058
- Event ID
- 20160127X52321
- Case number
- WPR16LA058
- Dataset
- full-current
- Source SHA-256
- 5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: e2ec8f877175c8a2aca2efd9f0ac929a22c8c7533fefb77fbce3ddc4e4a450d1; retrieved 2026-09-16T03:07:16.081Z.