LAX99LA103 · Zivko Aeronautics EDGE 540
Zivko Aeronautics EDGE 540 · Accident: total loss of engine power (mechanical failure) en route
From Tracy Municipal Airport (TCY) to San Carlos Airport (SQL)
Event
- NTSB case
- LAX99LA103
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- 0
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Zivko Aeronautics EDGE 540
- Aircraft type
- Zivko Aeronautics EDGE 540
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N9ND
- Operator
- Unknown
- Onboard fatalities
- Unknown
- Route
- From Tracy Municipal Airport (TCY), Tracy, CATo San Carlos Airport (SQL), San Carlos, CA
- Aircraft age
- Not recorded
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- En route · cruise
- First occurrenceThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Total loss of engine power (mechanical failure)
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Eng assembly, crankshaft counterweights/vib damper › Loose part/bolt/nut/clamp/etc
- Eng assembly, crankshaft counterweights/vib damper › Separation
- Manufacturer › Inadequate quality control
- Manufacturer › Procedures/directives, not followed
Approximate · Coordinates as recorded by the NTSB; no uncertainty radius is established.
NTSB narrative
The pilot said he was in normal cruise flight when the 200-hour since new Lycoming AEIO-540 engine began to over speed. The pilot said a roughness, which progressively worsened, was associated with the onset of the over speed event. He stated that he was unsuccessful in regaining control of the engine and initiated a power-off forced landing to a clear area next to a highway. The aircraft touched down in soft, muddy soil and the landing gear was torn out of the structure. Cracks were found across the rear of the engine case between the Nos. 5 and 6 cylinders. Disassembly of the engine revealed that one of the two counterweight rollers had become dislodged from the corresponding counterweight crankshaft lug bore and precipitated a catastrophic internal failure of the No. 6 connecting rod. Detailed examination of the separated counterweight crankshaft lug bore revealed rotational scoring around the inside diameter of the hole, while the roller bushing was broken in two pieces and displayed rotational scoring marks around the outside diameter. The designed bushing to bore clearance provides for an interference fit. The problematic lug bore was measured for circularity, position, and diameter with respect to design specifications. The lug bore was found outside of acceptable tolerances in all areas. According to Textron Lycoming and the FAA, a small number of crankshafts by serial number where produced with the lug bore(s) misreamed to an out of round condition during that stage of the manufacturing process. The accident crankshaft by serial number was outside of the believed problem range.
Probable cause
The manufacturer's inadequate quality control procedures, which allowed an improperly manufactured crankshaft to be shipped, resulting in the separation of one counterweight from the crankshaft lug and the subsequent catastrophic internal failure of the engine.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record LAX99LA103
- Event ID
- 20001205X00191
- Case number
- LAX99LA103
- Dataset
- historical-pre2008
- Source SHA-256
- 89e2df6d848e7ab3b42e7d7c7a03ff403303057a26ca04c95b3ea67201c3ce74
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: local date, investigation status. Values present in the bulk record are kept.
- The date is the local date; the NTSB stores the UTC date 1999-02-19.
- API snapshot SHA-256: d53573004e00b61edb6721ce50aca68da413ed74a6e945d2b0ff70422127de40; retrieved 2026-09-22T15:50:59.615Z.