ERA22LA109 · Cirrus Design Corp SR22
Cirrus Design Corp SR22 · Accident: powerplant system/component malfunction/failure en route
From Greenville Downtown Airport (GMU) to Charleston International Airport (CHS)
Event
- NTSB case
- ERA22LA109
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- 0
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Cirrus Design Corp SR22
- Aircraft type
- Cirrus SR22
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N879CD
- Operator
- Unknown
- Onboard fatalities
- Unknown
- Route
- From Greenville Downtown Airport (GMU), Greenville, SCTo Charleston International Airport (CHS), Charleston, SC
- Aircraft age
- About 20 years (built 2002)
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- En route
- Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Powerplant system/component malfunction/failure
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Aircraft › Aircraft power plant
Approximate · Coordinates from the NTSB case API, which marks them as estimated or does not say; no uncertainty radius is established.
NTSB narrative
The pilot reported that during cruise flight the oil annunciator light illuminated, the oil pressure decreased to zero, and the engine tachometer neared its maximum limit. Soon thereafter, the engine lost power. During the forced landing, the pilot activated the whole airplane parachute system at an altitude of about 2,000 ft above ground level. The airplane descended via the parachute and landed upright in a lake. The pilot and passenger were able to swim to shore and were not injured. The airplane’s fuselage and left elevator were substantially damaged during the landing. Postaccident examination of the engine revealed that all of the crankshaft connecting rod journals showed evidence of lubrication distress. Additionally, the No. 3 main journal bearing shifted, resulting in the blockage of the oil ports and elongation of the crankcase lock slot. The No. 6 connecting rod bearing was fused to the crankshaft journal. The No. 1 cylinder rod bearings were fused together on the crankshaft, and the bearing surface was smeared and torn. The bearing metal melted and re-solidified along the edges. It is likely that the shift of the No. 3 main journal bearing blocked the oil port and restricted oil to the engine and propeller, resulting in destruction of the bearing of the No. 6 cylinder. This likely resulted in the fracture of the connecting rod, breach of the crankcase, and the catastrophic failure of the engine. The engine overspeed reported by the pilot is consistent with a loss of oil pressure to the propeller governor, which would have lowered the blade pitch and increased engine rpm. Review of maintenance logbook records revealed the No. 2 cylinder was replaced about 500 hours before the accident flight, at which time the engine had accumulated about 2,420 hrs. It is possible that the crankcase thru bolts were incorrectly torqued after the No. 2 cylinder change about 500 hours before the accident flight, which could have resulted in a shift of the No. 3 main journal bearing.
Probable cause
A loss of engine power due to a shift of the No. 3 main journal bearing, which resulted in blocked oil ports that restricted oil to the engine’s internal components and a subsequent catastrophic engine failure.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record ERA22LA109
- Event ID
- 20220113104526
- Case number
- ERA22LA109
- Dataset
- full-current
- Source SHA-256
- 5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status, coordinates, cause areas. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: 43b591850949832f905adcbdee8393220b90eadc1d53a025edbfd4d2f766902c; retrieved 2026-09-16T14:53:37.778Z.