ERA20LA064 · Cirrus SR22
Cirrus SR22 · Accident: loss of engine power (partial) en route
From Worcester Regional Airport (ORH) to Curtis L Brown Jr Field (EYF)
Event
- NTSB case
- ERA20LA064
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- Unknown
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Cirrus SR22
- Aircraft type
- Cirrus SR22
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N323SR
- Operator
- Unknown
- Onboard fatalities
- Unknown
- Route
- From Worcester Regional Airport (ORH), Worcester, MATo Curtis L Brown Jr Field (EYF), Elizabethtown, NC
- Aircraft age
- About 14 years (built 2006)
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- En route
- Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Loss of engine power (partial)
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Aircraft › Aircraft power plant
Approximate · Coordinates from the NTSB case API, which marks them as estimated or does not say; no uncertainty radius is established.
NTSB narrative
The pilot reported that, during a cross-country flight, he heard a pop from the engine, and it subsequently stopped producing power; however, the engine continued to run, and the propeller continued to rotate. The pilot attempted to troubleshoot the loss of power; however, power was not restored. Subsequently, the pilot activated the airplane’s parachute system and the airplane impacted trees and terrain, resulting in substantial damage to the airframe. Postacccident examination of the engine revealed that the camshaft fractured at one of its four oil transfer holes. As a result, camshaft continuity was lost, and the engine was partially unable to produce power. Forensic examination of the fracture surface revealed that the fracture occurred due to fatigue that initiated from a burr at the corner of an oil transfer hole. The extent of fatigue crack growth through the cross-section suggested the overall torsion load on the camshaft was relatively low as the crack grew. However, a burr at the edge of a hole is a feature that is known to reduce component fatigue life. The burr was deformed and coated, consistent with forming during a peening operation and before the manganese phosphate coating had been applied. A similar burr was also observed on the adjacent oil transfer hole in the camshaft. The presence of a burr suggests the corner of the hole was not properly broken before the part was peened during manufacturing, leading to deformation of a sharp corner during the peening operation.
Probable cause
A fatigue failure of the camshaft due to a manufacturing defect, which resulted in a partial loss of engine power.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record ERA20LA064
- Event ID
- 20200102X30206
- Case number
- ERA20LA064
- Dataset
- full-current
- Source SHA-256
- 5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status, coordinates, cause areas. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: e4eec24e372378304ed9ee15f74e1075f2548c02aaf52fcfc2b52d29aa23e6bd; retrieved 2026-09-16T10:51:24.839Z.