WPR19LA020 · Cessna 182 G
Cessna 182 G · Accident: landing gear collapse
From Caldwell Executive Airport (EUL) to Burns, OR
Narrative check · The NTSB narrative appears to contradict this record's location. Values are shown as recorded, not corrected; compare with the narrative.
Event
- NTSB case
- WPR19LA020
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- Unknown
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Cessna 182 G
- Aircraft type
- Cessna 182
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N3267S
- Operator
- Unknown
- Onboard fatalities
- Unknown
- Route
- From Caldwell Executive Airport (EUL), Caldwell, IDTo Burns, OR
- Aircraft age
- About 54 years (built 1964)
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- Landing · landing roll
- Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Landing gear collapse
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Aircraft › Aircraft structures
- Aircraft › Aircraft systems
Approximate · Coordinates as recorded by the NTSB; no uncertainty radius is established.
NTSB narrative
Upon approaching the intended landing area, the pilot performed a high reconnaissance to assess the wind conditions. The airplane touched down and, during the landing roll, the left wing dipped downward. The left wing made contact with the ground before coming to rest with the left main landing gear sheared off.
The attachment bolt that connected the left main landing gear leg bracket exhibited a fatigue crack that had progressed through about one third of the bolt cross-section. This fatigue crack initiated at multiple fatigue crack initiation sites along the thread root. This thread root exhibited corrosion pitting that had penetrated the outer cadmium plating, which had led to fatigue cracking. When the remainder of the bolt could no longer support the stress at landing, the remaining cross section fractured in overstress. As this crack had propagated through about one third of the cross section without a discernible transition or mixed fracture zone between the fatigue crack and subsequent stress, the final fracture occurred at a high load event, such as the accident landing.
The bolts had been plated with cadmium, a corrosion inhibitor. However, corrosion pitting was observed along the threads, which led to fatigue cracking in both bolts. Although the cadmium plating can provide protection to the underlying alloy steel, corrosion such as in the form of pitting can still occur. This may be due to the operational environment, including locations near saltwater, as well as from a crevice corrosion mechanism.
With the fatigued bolt having fractured, the bracket would be able to flex or slide out the side. With these components able to flex, the bottom of the support housing could not support the downward forces from the gear spring, which led to its fracture. This would allow a cantilever force on the inboard support, which would have been enough force to fracture the attachment bolt on that support and the upper support frame. Although a hard landing would have caused this bolt to fracture, the fatigue crack diminished the amount of stress it could withstand.
Probable cause
The failure of the left main landing gear due to fatigue cracking of a bolt that initiated at a corrosion pit, which formed in the absence of a required protective cadmium coating.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record WPR19LA020
- Event ID
- 20181108X40851
- Case number
- WPR19LA020
- Dataset
- full-current
- Source SHA-256
- 5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status, cause areas. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: 7aa7f8989cdaed98f4ee7456db4d7c69fa09c5cc1b72f3bcb90ece39d2dc38d4; retrieved 2026-09-16T08:25:21.178Z.