GoJet Airlines Bombardier Inc CL 600 2C10 700C incident
Bombardier Inc CL 600 2C10 700C · Incident: uncontained engine failure en route
From Cincinnati Northern Kentucky International Airport (CVG) to Denver International Airport (DEN)
Event
- NTSB case
- ENG17IA006
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Incident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- 0
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- Airline
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Unknown
Bombardier Inc CL 600 2C10 700C
- Aircraft type
- Bombardier CL-600
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N367CA
- Operator
- GoJet Airlines
- Onboard fatalities
- Unknown
- Route
- From Cincinnati Northern Kentucky International Airport (CVG), Covington, KYTo Denver International Airport (DEN), Denver, CO
- Aircraft age
- About 14 years (built 2002)
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 121: Air Carrier
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- En route · cruise
- Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Uncontained engine failure
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- None
Cause areas
- Aircraft › Aircraft power plant
Approximate · Coordinates from the NTSB case API, which marks them as estimated or does not say; no uncertainty radius is established.
NTSB narrative
The No. 1 engine experienced a catastrophic failure due to a separated high pressure turbine (HPT) 2nd stage blade. The separated blade subsequently damaged the HPT 2nd stage nozzle vanes, remaining HPT 2nd stage rotor blades, and all four stages of the low pressure turbine (LPT).
Metallurgical analysis of the HPT 2nd stage blades that separated below the platform concluded that the first blade to separate failed due to a high cycle fatigue crack that originated from an area of corrosion on the convex side. Six additional blades separated below the blade platform at high cycle fatigue cracks that had transitioned to overload due to impact damage from the initial blade release. The remaining blades in the HPT 2nd stage separated above the blade platform due to overload consistent with secondary impact damage. Multiple blades that separated above the blade platform also had fatigue cracks present below the blade platform that originated from areas of corrosion. The corroded areas contained elements including: sulfur, sodium, potassium, and phosphorus, which are common corrosive elements. The source of the corrosive elements could not be identified.
The engine water wash schedule was reviewed and according to GoJet Airlines, water washes are performed on their CF34-8C engines every 1,200 flight hours, or when engine trend data shows performance degradation. GE currently recommends water washing the engine at every -2A check, or about 1,600 flight hours. A GE service bulletin applicable to CF-348C engines is scheduled to be released in the first quarter of 2018 that increases the water wash interval to 2,000 flight hours or when engine trend data shows performance degradation.
Probable cause
The probable cause of the uncontained No. 1 (left) engine failure was a separated high pressure turbine 2nd stage blade that failed due to a fatigue crack that originated below the blade platform from an area of corrosion.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record ENG17IA006
- Event ID
- 20161208X21155
- Case number
- ENG17IA006
- Dataset
- full-current
- Source SHA-256
- 5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status, coordinates, damage. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: ac16b2d4ec3c49fc97630c33cc7323b8865918c8fdbd42825bc1cf29f46c794b; retrieved 2026-09-16T04:53:11.870Z.