CEN10FA291 · Bell 222 U
Bell 222 U · Accident: part(s) separation from aircraft en route
From Grand Prairie Municipal Airport (GPM) to Grand Prairie Municipal Airport (GPM)
Event
- NTSB case
- CEN10FA291
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 2 · all aircraft and ground
- Ground fatalities
- Unknown
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Bell 222 U
- Aircraft type
- Bell 222
- Category
- Helicopter
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N515MK
- Operator
- CareFlite
- Onboard fatalities
- Unknown
- Route
- From Grand Prairie Municipal Airport (GPM), Grand Prairie, TXTo Grand Prairie Municipal Airport (GPM), Grand Prairie, TX
- Aircraft age
- Not recorded
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- En route · cruise
- Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Part(s) separation from aircraft
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Aircraft › Aircraft propeller/rotor
- Not determined › Not determined
Approximate · Coordinates as recorded by the NTSB; no uncertainty radius is established.
NTSB narrative
The helicopter was on a postmaintenance flight when it experienced an in-flight breakup about 8 minutes after departure, collided with the ground, and exploded into flames. Several witnesses reported seeing the tail boom, main rotor hub, main rotor blades, and other debris separate from the helicopter. One witness heard a "loud crack" sound. A postaccident examination revealed that the helicopter's swashplate A-side drive pin had failed in flight, which resulted in the helicopter's in-flight breakup and uncontrolled descent. The separated head of the drive pin remained in the interior of the swashplate. The fractured drive pin hole exhibited mechanical damage, with the markings of increased amplitude and spacing progressing outward, which suggests that the fractured drive pin oscillated and then ejected from its hole.
The fracture surface of the swashplate A-side drive pin displayed brittle cleavage-like fractures interspersed with intergranular separations and small regions of ductile dimples, consistent with hydrogen embrittlement. The B-side drive pin, on the opposite side, was found intact. Both drive pins met engineering drawing requirements for material, hardness, heat treatment and plating. However, there were no engineering standards for hydrogen content. During tests of two pins intentionally charged with hydrogen, one pin fractured under static load, and the fracture topography was consistent with the fracture topography on the failed A-side pin from the accident helicopter. Based on the fracture topography, it is likely that the swashplate A-side drive pin fractured as a result of hydrogen embrittlement. Investigators were unable to conclusively determine the source of the hydrogen. No other material discrepancies of the drive pin were found. Metallurgical examination revealed that fractures through the mast, B-side pitch link bolt and actuator attachments were consistent with overstress separations.
Probable cause
The fracture of a swashplate drive pin as a result of hydrogen embrittlement due to an unknown source, which resulted in an in-flight breakup of the main rotor system during cruise flight.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record CEN10FA291
- Event ID
- 20100602X63138
- Case number
- CEN10FA291
- Dataset
- full-current
- Source SHA-256
- 5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: 7d35fb5a52b0a280fcb96781e871cdc18a1b61f6fd8a43dbb896c2880be34f7a; retrieved 2026-09-13T20:50:54.848Z.