FLIGHT FINDINGSAVIATION OCCURRENCE MAP
Back to map

ERA10GA015 · Bell OH-58A

10 Oct 2009 · Ocala, FL, United States

Bell OH-58A · Accident: loss of engine power (partial) on approach

From Ocala International Airport - Jim Taylor Field (OCF) to Ocala International Airport - Jim Taylor Field (OCF)

Report a problem

Event

NTSB case
ERA10GA015
Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
Accident
InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
Completed
API-reported fatalities
0 · all aircraft and ground
Ground fatalities
Unknown
OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
Government
WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
Visual Meteorological Cond

Bell OH-58A

Aircraft type
Bell OH-58
Category
Helicopter
RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
N911AF
Operator
Unknown
Onboard fatalities
Unknown
Route
From Ocala International Airport - Jim Taylor Field (OCF), Ocala, FLTo Ocala International Airport - Jim Taylor Field (OCF), Ocala, FL
Aircraft age
Not recorded
Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
Public Aircraft
Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
Approach · VFR pattern final
Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
Loss of engine power (partial)
DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
Substantial

Cause areas

  • Aircraft › Aircraft oper/perf/capability
  • Aircraft › Aircraft power plant
  • Not determined › Not determined

Approximate · Coordinates as recorded by the NTSB; no uncertainty radius is established.

NTSB narrative

The pilot stated that while on final approach for landing, at about 20 knots and 120 feet above ground level, he felt a "vibration" and the helicopter experienced a loss of engine and rotor rpm. The pilot stated that he lowered the collective for an immediate landing and heard the low-rotor warning horn during the descent. The helicopter experienced a hard landing and rotated to the left after touchdown. Once the helicopter settled, the pilot closed the throttle and exited the helicopter. Initial examination of the helicopter revealed no preimpact mechanical anomalies. The engine was then removed from the helicopter and the turbine governor was removed from the engine. As the turbine governor was removed from the engine, several rolling elements (balls) spilled from the governor and were not recovered. Disassembled portions of the governor were forwarded to the NTSB Materials laboratory and examination of the components revealed the lubricant used was consistent with what was prescribed by the manufacturer. Further examination revealed displacement of the governor driveshaft, deformation of a bearing seal, rotational damage on bearing lands and spacers, as well as spalling on rolling components of the governor. The damage was consistent with wear over an extended period, and neither the cause nor the sequence of wear and failure of the examined components could be determined. Examination of maintenance records revealed that the governor was in service 30 hours beyond its 2,000-hour time-before-overhaul (TBO) interval, but that under the military maintenance program by which the helicopter was maintained, TBO intervals could be adjusted plus or minus 75 hours to align with other scheduled maintenance. Examination of the manufacturer's Operator's Manual revealed that the loss of engine power occurred at an altitude that fell in the "avoid area" of the Height Velocity diagram. According to the manual, “Flight conducted within the avoid area of the chart (figure 9-3) exposes the helicopter to a high probability of damage despite the best efforts of the pilot."

Probable cause

The excessive wear and failure of engine governor components for undetermined reasons, which resulted in a loss of engine power.

Verbatim NTSB analysis and probable cause from the NTSB dataset

Sources

NTSB record ERA10GA015
Event ID
20091013X62153
Case number
ERA10GA015
Dataset
full-current
Source SHA-256
5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
  • Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
  • Filled from the NTSB case API where the bulk record had no value: local date, investigation status. Values present in the bulk record are kept.
  • The date is the local date; the NTSB stores the UTC date 2009-10-11.
  • API snapshot SHA-256: 2d9ba9d863045e1a923a2b40f74f9a425ccb2b6691e73c9009e7c967778df19d; retrieved 2026-09-15T13:24:24.899Z.