SEA08LA157 · Rockwell 690B
Rockwell 690B · Accident: landing gear collapse
From Portland Hillsboro Airport (HIO) to Baker City Municipal Airport (BKE)
Event
- NTSB case
- SEA08LA157
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- Unknown
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Rockwell 690B
- Aircraft type
- Rockwell 690
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N9KG
- Operator
- Eric Owen
- Onboard fatalities
- Unknown
- Route
- From Portland Hillsboro Airport (HIO), Hillsboro, ORTo Baker City Municipal Airport (BKE), Baker City, OR
- Aircraft age
- Not recorded
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- Landing · landing roll
- Defining eventThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Landing gear collapse
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Aircraft › Aircraft systems
Approximate · Coordinates as recorded by the NTSB; no uncertainty radius is established.
NTSB narrative
The airplane sustained substantial damage following a right main landing gear collapse on its first landing after a 150-hour maintenance inspection. The collapse was due to a fracture and separation of the right main landing gear's housing boss from the inboard hydraulic cylinder clevis. The 150-hour inspection included the installation of a new clevis on the right main landing gear's inboard hydraulic actuator. A postaccident examination by a Federal Aviation Administration inspector revealed that the inboard hydraulic rod bearing attach bolt was screwed all the way in, which was contrary to instructions specified in the maintenance manual. While the manual states that the attach bolt should be backed off three complete turns in order to maintain proper rigging, the manufacturer reported that improper preload adjustment of the right main landing gear actuator cylinder could not create a large enough force to induce the failure of the right main landing gear outer body boss and clevis fitting. A metallurgical examination of the inboard hydraulic cylinder clevis and associated clevis pin housing boss showed that the housing boss had fractured from the main body of the strut and that the fracture was consistent with overstress. There was no evidence of wear or fatigue cracking on either the clevis or the housing boss. The postaccident examination of the airplane, the landing gear system, and its associated components failed to reveal the initiating event that subsequently resulted in the overstress failure and landing gear collapse.
Probable cause
The landing gear collapse during the landing roll due to the fracture of the inboard hydraulic cylinder clevis pin housing boss for undetermined reasons.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record SEA08LA157
- Event ID
- 20080702X00972
- Case number
- SEA08LA157
- Dataset
- full-current
- Source SHA-256
- 5cf380f0061817c0331a6b2d8cc7e0ee3a79bea469a1001dc5c10e56f35f5ab3
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: 848ad4034b1be936a755321f2fbf8f569f2069427d5b9e75fdbc28008afa0eb0; retrieved 2026-09-15T09:51:06.786Z.