ANC05LA051 · Arctic Aircraft Company S-1B2
Arctic Aircraft Company S-1B2 · Accident: airframe, component or system failure during landing
From Merrill Field (PAMR) to an unrecorded destination
Event
- NTSB case
- ANC05LA051
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 0 · all aircraft and ground
- Ground fatalities
- Unknown
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Arctic Aircraft Company S-1B2
- Aircraft type
- Arctic S-1
- Category
- Airplane
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N67AT
- Operator
- Unknown
- Onboard fatalities
- Unknown
- Route
- From Merrill Field (PAMR), Anchorage, AKTo not recorded
- Aircraft age
- Not recorded
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- Landing · flare/touchdown
- First occurrenceThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Airframe, component or system failure
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Substantial
Cause areas
- Miscellaneous, bolt/nut/fastener/clamp/spring › Not secured
Approximate · Coordinates from the NTSB case API, which marks them as estimated or does not say; no uncertainty radius is established.
NTSB narrative
The private certificated pilot was conducting short-field landings with the wheels extended on a frozen lake in a wheel/ski-equipped airplane. On the ninth landing, the main landing gear collapsed, and the airplane settled onto its belly. The pilot said both landing gear A-frame type gear assemblies rotated outward and upward, as the airplane settled onto the ice. He said that the touchdown was not hard, and the common point of failure was at the center, fuselage-mounted spring shock assembly. Each landing gear assembly has an extended arm that attaches in the center of the fuselage to the bottom end of a vertically mounted oleo shock. The left gear arm attaches to the oleo lug by a clevis bolt that is installed front-to-back. The bolt also retains the top end of two oval-shaped metal link plates that are positioned vertically at the front and aft side of the oleo attach lug. A clevis bolt, through the bottom hole of each link, retains a spacer and the right landing gear extended attaching arm. Each clevis bolt uses a tension castle nut, with a cotter pin for security. The aft link plate had extensive elongation of the upper bolt hole radius. The forward link plate upper bolt hole was fractured, and had opening and elongation of a segment of the bolt hole radius. The upper clevis bolt was found at the scene, but its castle nut and cotter pin were not located. The clevis bolt was bent along its span. The threaded portion of the bolt had flattening of the threads about 1/3 of its circumference, and partial threads on the remaining 2/3 of its circumference, with slight necking of the bolt end. An FAA aerospace engineer examined the recovered parts and reported, in part, that: "...the cotter pin failed in service, or was never installed, and the shear nut loosened and fell off the aft end of the upper bolt, or was never installed." The airplane had accrued 11 hours since the most recent annual inspection.
Probable cause
A main landing gear collapse during the landing touch down due to a non-secured clevis bolt at the common attach point on the landing gear oleo shock.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record ANC05LA051
- Event ID
- 20050323X00349
- Case number
- ANC05LA051
- Dataset
- historical-pre2008
- Source SHA-256
- 89e2df6d848e7ab3b42e7d7c7a03ff403303057a26ca04c95b3ea67201c3ce74
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status, coordinates. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: 623ba97ff3131f8c96d4fc2439930066ab70e1670dd3fa05e9b43bebfb77e087; retrieved 2026-09-22T06:10:28.855Z.