NYC97FA076 · Eurocopter MBB-BK117-B2 MBB-BK117-
Eurocopter MBB-BK117-B2 MBB-BK117- · Accident: airframe, component or system failure during initial climb
From 6N4 to Westchester County Airport (HPN)
Event
- NTSB case
- NYC97FA076
- Event typeAccident: someone killed or seriously injured, or the aircraft substantially damaged (NTSB definition). Incident: an occurrence that affected or could have affected safety, short of that. Glossary
- Accident
- InvestigationHow far the investigation had got when the record was published: preliminary, ongoing, final or completed. Unknown where the source does not say. Glossary
- Completed
- API-reported fatalities
- 1 · all aircraft and ground
- Ground fatalities
- 0
- OperationWhat kind of flying it was, grouped by the rules it flew under: airline (US Part 121), air taxi and commuter (Part 135), general aviation (Part 91 and similar), military or government. Glossary
- General aviation
- WeatherVisual meteorological conditions (VMC): good enough to fly by looking outside. Instrument conditions (IMC): cloud or low visibility, flying by instruments. Glossary
- Visual Meteorological Cond
Eurocopter MBB-BK117-B2 MBB-BK117-
- Aircraft type
- Eurocopter MBB-BK117-B2
- Category
- Helicopter
- RegistrationThe aircraft's tail number, such as N12345 or G-ABCD. Registrations are reissued, so the same one years apart can be a different aircraft. Glossary
- N909CP
- Operator
- Unknown
- Onboard fatalities
- Unknown
- Route
- From 6N4To Westchester County Airport (HPN), White Plains, NY
- Aircraft age
- Not recorded
- Flight rulesThe regulations the flight operated under: in the US, Part 91 (general aviation), Part 121 (airlines), Part 135 (air taxi and commuter) and others; for flights abroad, the NTSB's coarser commercial or non-commercial code. Glossary
- Part 91: General Aviation
- Phase of flightThe stage of the flight when things started to go wrong: standing, taxi, takeoff, initial climb, en route, maneuvering, approach or landing. Glossary
- Initial climb
- First occurrenceThe single coded event the NTSB judges best describes what happened (records from 2008 on). Older records name the first occurrence in the sequence instead. Glossary
- Airframe, component or system failure
- DamageDestroyed: beyond practical repair. Substantial: damage that affects the structure, performance or handling and normally needs major repair. Minor: less than that. Glossary
- Destroyed
Cause areas
- Company maintenance personnel › Maintenance, replacement
- Miscellaneous rotorcraft, tail pylon › Fatigue
- Miscellaneous rotorcraft, tail pylon › Separation
Approximate · Coordinates as recorded by the NTSB; no uncertainty radius is established.
NTSB narrative
After taking off, the helicopter climbed to approximately 30 feet, and produced a loud bang. The helicopter rotated nose right several times, descended, struck the heliport pier and continued into the East River where it submerged. The pilots were evacuated underwater; the passengers were found in the cabin unconscious and recovered by divers. The throttles were found in the flight position. The investigation revealed that the upper 3 feet of the vertical fin had failed due to fatigue fractures and had separated, along with the tail rotor assembly. About 4 1/2 years prior, the left-hand yaw SAS actuator mounting plate attached to the vertical fin developed a crack and was replaced using blind rivets in lieu of the solid rivets specified in the manufacturer's design drawings. Neither the repair nor the substitution of rivets was addressed in the manufacturer's maintenance manual. Literature from the rivet manufacturer indicated that blind rivets may be substituted for solid rivets in most applications. No specific reference by the FAA was found to allow for this rivet substitution. The investigation revealed 11 other helicopters with fatigue cracking in the vertical fin spar similar to the accident helicopter. Testing revealed that materials fastened with blind rivets are more susceptible to fatigue cracking than materials fastened with solid rivets. Passenger interviews disclosed that many were not aware of emergency exit locations, or how to operate them; life vests were available, but were not used.
Probable cause
Fatigue failure of the vertical fin, accelerated by the installation of blind rivets in lieu of solid rivets in the replacement of the yaw SAS mount support, which resulted in the loss of helicopter directional control and collision with the terrain (water). Factors contributing to the accident were: a lack of information regarding repair of the yaw SAS mount support in the manufacturer's maintenance manuals, and the design of the vertical fin which was susceptible to fatigue cracking. An additional factor was the lack of an adequate passenger briefing.
Verbatim NTSB analysis and probable cause from the NTSB dataset
Sources
NTSB record NYC97FA076
- Event ID
- 20001208X07806
- Case number
- NYC97FA076
- Dataset
- historical-pre2008
- Source SHA-256
- 89e2df6d848e7ab3b42e7d7c7a03ff403303057a26ca04c95b3ea67201c3ce74
Source notes (4)
- Unreviewed is an editorial label, not an investigation status. API-sourced is not report-checked or human-reviewed. Explicit event totals are used without summing aircraft injury tables; onboard allocation is withheld. Unknown values remain unknown. The operation category is mapped from the NTSB-reported FAR part and has not been reviewed.
- Filled from the NTSB case API where the bulk record had no value: investigation status. Values present in the bulk record are kept.
- The date is the local date, which is the same as the UTC date the NTSB stores.
- API snapshot SHA-256: 7c49318100e90926163201147279d0ebd5aa8e20b5a46ec5694182821a1b3ccc; retrieved 2026-09-20T22:59:41.891Z.